Oppo Reno 3A Firmware is a stock flash file Rom primarily used to fix the device from various issues including Stuck at boot logo, removing screen lock, FRP lock, and hang problems easily. If you want a simple & quick solution to fix the device then here you are in the right place. Through this post, We are going to share with you the complete procedure on How to Flash Oppo Reno 3A CPH2013 Firmware Flash File (Stock ROM) with Oppo Flash Tool easily.
Read More: Oppo USB Driver Download (Qcom MTK)– Latest for Windows (32 & 63 Bit)
Download Oppo Reno 3A CPH2013 Firmware Flash File & Tool
Download Oppo Reno 3A CPH2013 Firmware Flash File latest all versions to your computer. The Stock ROM comes with a zip file, So you need to download the 7zip or WinRAR to extract the file.
| CPH2013export_11_C.28 | Download |
| CPH2013export_11_C.27 | Download |
| Password | thetechygyan.com |
| Download | Oppo Flash Tool |
| Download | Oppo USB Driver |
Make sure: Don’t try the file with any other models of Oppo or Realme devices. This flash file supports the same model of Oppo models only.
Read More: MSM Download Tool [LATEST VERSION] WITH ID & PASSWORD
How to Flash:
Important Note: MSM Download Tool is the Official firmware flashing tool for all Oppo devices, It’s required an active internet connection to flash any Oppo smartphones and tablets. so make sure, you have enough internet data during flashing the firmware.
- First of all, Download the Oppo Reno 3A CPH2013 Flash File and Tool on your PC.
- Then extract both files on your computer by using 7zip or WinRAR.
- Open the extracted Flash tool folder and copy all the files and paste them into the Flash file folder.
- Run the “MSMDownload.exe” with administrator permission.
- A login popup will open, put the correct login id and password there,
- Otherwise, you can’t flash your device.
- I have a solution to Activate the MSM Download tool without any Oppo ID and Password or you can search also on Google to get the email id and password.
- Once you log in successfully then the MSM Download tool will open.
- Now follow the main process carefully.
- On the MSM Download tool, you can see the “Start All” button, just click on that to load the firmware files fully.
- Now the tool will verify your PC memory checksum, it will take a couple of minutes.
- Now you need to connect your Oppo Reno 3A to pc via USB cable and press the Oppo Reno 3A Boot key.
Oppo Reno 3A Boot Key:
Every Oppo MTK and Qualcomm device comes with different boot keys, but most of the Oppo Qualcomm devices are coming with (Volume down + Power and connect the USB cable) for boot key combination so try this key combination to boot your Oppo devices to {Qualcomm QD Loader Port/MTK VCOM USB Driver} if this key combination does not work then you can search on google to find the right boot key combination.
- Power Off your device, then press and hold (Volume down+Power) and connect the USB cable.
Note: check your device comport under the Device Manager =>> Port Section. There you will see (Qualcomm QD Loader).
- Open the MSM Download tool, a red line will appear then the yellow line will appear and the flashing will start automatically. (If your device is successfully connected to the PC).
- Now, wait for the flashing finish, it will take 10-20 minutes.
- Once the flashing finish, you will see a green line will appear with the complete message.
- Now disconnect your device from pc and power on your device.
- After that, set up all the initial steps on your Oppo Reno 3A.
- Then check you have successfully flashed Oppo Reno 3A CPH2013 Flash File Stock Firmware ROM,
- Done.
Read More:
Read More: Oppo Preloader Driver Download (Qcom MTK) – Latest for Windows (32 & 63 Bit)
I hope all of you found the article of use if you are stuck at any step or could not understand anything related to this topic you can let me know in the comment section.
